Hydroviv Under Sink Water Filter

When you order, Hydroviv analyzes local water quality data for your specific zip code. They then configure the filter media inside the cartridge to target the specific contaminants most prevalent in your area's water supply.

Yes, the system is designed for DIY installation. It connects directly to your existing cold water line using standard 3/8-inch compression fittings, and most users complete the setup in about 15 minutes without needing special tools.

The filter cartridge is rated for six months of use or 720 gallons, whichever comes first. After that, the filtration media will lose its effectiveness and should be swapped out to maintain water quality.

The system is engineered to maintain a flow rate between 0.72 and 1 gallon per minute. While you might notice a very slight difference compared to an unfiltered faucet, it is designed to be consistent enough for everyday kitchen tasks like filling pots and washing produce.

The seven-stage filtration process is designed to target harmful contaminants like lead, PFAS, and chlorine while leaving beneficial minerals like calcium and magnesium intact. It focuses on purification rather than stripping the water of its natural composition.

The unit measures 14 inches by 6 inches by 6 inches. It is compact enough to fit under most standard kitchen sinks, but you should measure your available cabinet space to ensure there is enough clearance for the housing and the hose connections.