Burgtec Bushings for Offset Hardware

No, these are specifically engineered for use with titanium offset shock hardware. They are designed to accommodate the unique tolerances and geometry of offset setups, so they won't provide the correct fit for standard, non-offset hardware.

The pre-tensioned design creates a tighter, more precise interface between your shock eyelet and the mounting hardware. This helps eliminate unwanted play or 'slop' in the rear suspension, resulting in a more responsive feel and reduced wear on your shock components.

Each pack contains two bushings, which is the standard amount needed to service one shock eyelet.

While you don't need proprietary tools, a dedicated shock bushing press is highly recommended. Using a proper press ensures the bushings are seated evenly without damaging the material or the shock eyelet itself.

You should check your bushings whenever you notice side-to-side play in the rear shock or hear a knocking sound while riding. If you ride frequently in wet or muddy conditions, it's good practice to inspect them every few months, as grit can accelerate wear.