Fox Shox QR Cam and Hardware

This specific kit is designed for the standard Fox 15mm QR lever system. It is not compatible with Kabolt axles or the newer floating axle designs, so please verify your fork's axle type before purchasing.

You should consider replacing these parts if the lever feels gritty, fails to hold tension consistently, or if the cam mechanism has developed noticeable play. If the lever no longer snaps into the closed position with a firm, secure feel, the internal hardware is likely worn.

You will need basic shop tools, typically including a set of hex keys and potentially a small pick or screwdriver to remove the old hardware. The installation is straightforward, but take care not to lose the small springs or detents during the swap.

Yes, if the issue is caused by a worn cam or stripped internal hardware, this kit will restore the proper clamping force. However, if the threads on the axle itself or inside the fork lowers are damaged, this kit will not resolve the problem.

Yes, this is an original equipment manufacturer (OEM) part from Fox, ensuring the exact fit and material specifications required for your fork's axle system.