Industry Nine Tubeless Rim Tape

While this tape is optimized for Industry Nine road and gravel wheelsets, it can be used on other rims provided the width matches your rim bed. Always measure your internal rim width before purchasing to ensure you have full coverage from sidewall to sidewall.

A single 10-yard roll is typically enough to tape two standard 700c or 650b wheelsets. This accounts for a single layer of tape with a slight overlap at the valve hole, which is the recommended installation method.

Yes, proper preparation is critical for a reliable seal. Thoroughly clean the rim bed with isopropyl alcohol to remove any residual sealant, grease, or dirt, and ensure the surface is completely dry before applying the tape.

This specific tape is engineered for the demands of road and gravel riding. While it may technically adhere to mountain bike rims, it may not be wide enough or durable enough to handle the higher volume and lower pressures associated with mountain biking.

Apply the tape by pulling it taut as you go, pressing it firmly into the center channel of the rim first. Using a clean rag or your thumb to smooth the tape outward toward the sidewalls as you work around the wheel will help eliminate air pockets.